Study Guide

Learning outcomes

The student is able to:
- define international preparedness and crisis management operators and their roles
- define fundamental international preparedness and crisis management compliance requirements and best practices
- define global threats and analyze their impact to society

Teaching methods

Contact and virtual implementation, individual and team work. Before enrolling to this study unit, you should have adequate competence level of security management, which you can acquire for example by completing study unit: A9484 Basics of Corporate Security and Risk Management 10 credits.No hybrid-lessons are arranged, lectures are not recorded.

Learning materials and recommended literature

Teachers will provide relevant materials. All required reading will be either distributed via Canvas, available freely on the internet. Materials created by teachers (copyright holders) and only to be used for the purposes of this study unit.

Alternative completion methods of implementation

You may have acquired competence, for example through work experience, training organised in the workplace, organisational activities or hobbies. Familiarize yourself with the process in LINK
(https://laureauas.sharepoint.com/sites/linken/studypath/planningofstudies/recognitionofpriorlearning/Pages/default.aspx.)
To apply for the recognition of this study unit, complete the form for recognition of prior studies (in the menu on the right). Enclose with your application any documents you refer to. If required, also enclose a description of the content of the substitutive studies.

Important dates

Contact sessions are directly visible in Pakki and not repeated here.
According to the degree regulations (section 18): students must be present in the first contact session (which is 20.02.2024 16.00 - 18.00) or notify their teacher in charge beforehand if they cannot attend. If they fail to notify the teacher of their absence in the first contact session, their enrollment will be rejected. After the first contact day no new students are accepted on the course. The Orientation assignment is available in Canvas from . By completing the orientation assignment the student will also confirm his/hers enrollment on the course.

This study unit includes an international virtual exercise in Leppävaara, Student Barents Rescue. The exercise is held on 12.3. (09.15-17.00) (+ 11.3. a short introduction 15.30-17.00). Students who participate to the exercise will be registered on the first contact lesson. If the student cannot join to the exercise, it can be replaced by writing an essay. (not the same than International security analysis- assignment).

Forms of internationality

The study unit is suitable for exchange students.

Students workload

The workload is approximately 135 hours total.

Content and scheduling

After completing the course the student is able to:
- analyze the international security environment, the phenomenon, trends and forces affecting international business,
- understand the interdependence of Internal and External Security
- have an understanding of some the main actors in international security (task and roles)
- analyze international security through a current case

Further information for students

Tutoring:
Tutoring is available on beforehand set days and upon request. Personal discussion times should be pre-agreed with teacher.
Communication:
Communication will be handled via Canvas workspace message boards. Private messages to teachers should be handled via email.
Zoom- application will be used for tutoring and general information sharing. The lecturers will in advance create a Teams- group for this study unit and invite the students to join.
Canvas is used for formal information, material sharing and storeing, returning assignments, etc.
If necessary, other means of communication will be agreed by the learning community commonly in the beginning of the study unit.
Changes to preliminary program are possible, but the students will be notified if neccessary.

Grading scale

H-5

Evaluation methods and criteria

In this study unit the assessing of the competences will be done by using the criteria set for requirement level II.
(https://laureauas.sharepoint.com/sites/studentEn_studyperformancesandevaluation/SitePages/Evaluation-criteria-for-Bachelor%27s-studies.aspx#requirement-level-ii)

Evaluation criteria, satisfactory (1-2)

The student is able to
– use essential professional concepts when explaining various work practices and situations
– search for information in different sources
– report
– work under guidance using the skills and methods learned
– interact with customers and/or co-operation partners
– receive guidance
– work as a member of a team
– plan the progress of his/her work and use of time under guidance
– work safely and in accordance with the professional code of conduct
– follow the provided instructions and rules

Evaluation criteria, good (3-4)

The student is able to
– use professional concepts in a consistent manner when explaining various work practices and situations
– gather information and use his/her knowledge basis
–report in the agreed manner
– work using the skills and methods learned
– engage in professional interaction with customers and/or co-operation partners and identify their needs
– take part in guidance and utilise it
– engage in goal-oriented work in a team
– plan and manage the progress of his/her work and use of time
– detect safety-related risks
– justify this/her actions in accordance with the professional code of conduct

Evaluation criteria, excellent (5)

The student is able to
– use professional concepts extensively
– compare and choose relevant information
– report and communicate in a professional manner
– work independently, using the skills and methods learned
– take responsibility for interaction with customers and/or co-operation partners and for responding to their needs
– anticipate his/her need for guidance
– promote the team’s work and team spirit
– manage his/her time appropriately, completing the agreed tasks at the required quality level
– work responsibly, applying the skills and methods learned
– plan and evaluate their work, taking safety and/or ethical aspects into consideration

Further information

Before enrolling to this study unit, you should have adequate competence of safety, security and risk management, which you can acquire for example by completing study unit HT00BN79 Basics of Corporate Safety, Security and Risk Management (10 cr) or TO00BS57 Basic Theory of Corporate Safety, Security and Risk Management (5 cr) at Open University of Applied Sciences

Learning outcomes

The student is able to:
- define international preparedness and crisis management operators and their roles
- define fundamental international preparedness and crisis management compliance requirements and best practices
- define global threats and analyze their impact to society

Teaching methods

Only virtual implementation, individual (and team) work. Before enrolling to this study unit, you should have adequate competence level of security management, which you can acquire for example by completing study unit: A9484 Basics of Corporate Security and Risk Management 10 credits.

Learning materials and recommended literature

Teachers will provide relevant materials. All required reading will be either distributed via Canvas or available freely on the internet. Materials created by teachers (copyright holders) and only to be used for the purposes of this study unit.

Alternative completion methods of implementation

You may have acquired competence, for example through work experience, training organised in the workplace, organisational activities or hobbies. Familiarize yourself with the process in LINK (https://laureauas.sharepoint.com/sites/linken/studypath/planningofstudies/recognitionofpriorlearning/Pages/default.aspx. ) To apply for the recognition of this study unit, complete the form for recognition of prior studies (in the menu on the right). Enclose with your application any documents you refer to. If required, also enclose a description of the content of the substitutive studies.

Important dates

Contact sessions are directly visible in Pakki and not repeated here.
Start of this study unit is 15.05.2023 16.00 - 18.00 (ZOOM).
1. According to the degree regulations (section 18): students must be present in the first contact session or notify their teacher in charge beforehand if they cannot attend. If they fail to notify the teacher of their absence in the first contact session, their enrollment will be rejected. After the first contact day no new students are accepted on the course.
2. Additionally, in order to get a seat on this study unit the student has to do the orientation assignment available from 1.5 and due 16.5 at 2359 hrs.

The above mentioned two points have to be accomplished by the student in order to get a seat on this study unit.

Deadline for all assignments is 20.8.2023..

Forms of internationality

The study unit is suitable for exchange students.

Students workload

The workload is approximately 135 hours total.

Content and scheduling

After completing the course the student is able to:
- understand what is meant by International Security
- analyze the international security environment, the phenomenon, trends and forces affecting international security and business,
- understand the interdependence of Internal and External Security
- have an understanding of some the main actors in international security (task and roles)
- analyze international security through a current case

Further information for students

Tutoring:
Tutoring is available on beforehand set days and upon request. Personal discussion times should be pre-agreed with teacher.
Communication:
Communication will be handled via Canvas workspace message boards. Private messages to teachers should be handled via email.
Zoom- application will be used for tutoring and general information sharing. The lecturers will in advance create a Teams- group for this study unit and invite the students to join.
Canvas is used for formal information, material sharing and storeing, returning assignments, etc.
If necessary, other means of communication will be agreed by the learning community commonly in the beginning of the study unit.
Changes to preliminary program are possible, but the students will be notified if neccessary.

Grading scale

H-5

Evaluation methods and criteria

In this study unit the assessing of the competences will be done by using the criteria set for requirement level II.

Evaluation criteria, satisfactory (1-2)

The student is able to
– use essential professional concepts when explaining various work practices and situations
– search for information in different sources
– report
– work under guidance using the skills and methods learned
– interact with customers and/or co-operation partners
– receive guidance
– work as a member of a team
– plan the progress of his/her work and use of time under guidance
– work safely and in accordance with the professional code of conduct
– follow the provided instructions and rules

Evaluation criteria, good (3-4)

The student is able to
– use professional concepts in a consistent manner when explaining various work practices and situations
– gather information and use his/her knowledge basis
–report in the agreed manner
– work using the skills and methods learned
– engage in professional interaction with customers and/or co-operation partners and identify their needs
– take part in guidance and utilise it
– engage in goal-oriented work in a team
– plan and manage the progress of his/her work and use of time
– detect safety-related risks
– justify this/her actions in accordance with the professional code of conduct

Evaluation criteria, excellent (5)

The student is able to
– use professional concepts extensively
– compare and choose relevant information
– report and communicate in a professional manner
– work independently, using the skills and methods learned
– take responsibility for interaction with customers and/or co-operation partners and for responding to their needs
– anticipate his/her need for guidance
– promote the team’s work and team spirit
– manage his/her time appropriately, completing the agreed tasks at the required quality level
– work responsibly, applying the skills and methods learned
– plan and evaluate their work, taking safety and/or ethical aspects into consideration

Further information

Before enrolling to this study unit, you should have adequate competence of safety, security and risk management, which you can acquire for example by completing study unit HT00BN79 Basics of Corporate Safety, Security and Risk Management (10 cr) or TO00BS57 Basic Theory of Corporate Safety, Security and Risk Management (5 cr) at Open University of Applied Sciences

Learning outcomes

The student is able to:
- define international preparedness and crisis management operators and their roles
- define fundamental international preparedness and crisis management compliance requirements and best practices
- define global threats and analyze their impact to society

Teaching methods

Contact and virtual implementation, individual and team work. Before enrolling to this study unit, you should have adequate competence level of security management, which you can acquire for example by completing study unit: A9484 Basics of Corporate Security and Risk Management 10 credits.

Learning materials and recommended literature

Teachers will provide relevant materials. All required reading will be either distributed via Canvas, available freely on the internet. Materials created by teachers (copyright holders) and only to be used for the purposes of this study unit.

Alternative completion methods of implementation

You may have acquired competence, for example through work experience, training organised in the workplace, organisational activities or hobbies. Familiarize yourself with the process in LINK
(https://laureauas.sharepoint.com/sites/linken/studypath/planningofstudies/recognitionofpriorlearning/Pages/default.aspx.)
To apply for the recognition of this study unit, complete the form for recognition of prior studies (in the menu on the right). Enclose with your application any documents you refer to. If required, also enclose a description of the content of the substitutive studies.

Important dates

Contact sessions are directly visible in Pakki and not repeated here.
According to the degree regulations (section 18): students must be present in the first contact session (which is 22.2.2023) or notify their teacher in charge beforehand if they cannot attend. If they fail to notify the teacher of their absence in the first contact session, their enrollment will be rejected. After the first contact day no new students are accepted on the course.
The Orientation assignment is available in Canvas from 1.2.2023 to 23.2.2023. By completing the orientation assignment the student will also confirm his/hers enrollment on the course.

Forms of internationality

The study unit is suitable for exchange students.

Students workload

The workload is approximately 135 hours total.

Content and scheduling

After completing the course the student is able to:
- analyze the international security environment, the phenomenon, trends and forces affecting international business,
- understand the interdependence of Internal and External Security
- have an understanding of some the main actors in international security (task and roles)
- analyze international security through a current case

Further information for students

Tutoring:
Tutoring is available on beforehand set days and upon request. Personal discussion times should be pre-agreed with teacher.
Communication:
Communication will be handled via Canvas workspace message boards. Private messages to teachers should be handled via email.
Zoom- application will be used for tutoring and general information sharing. The lecturers will in advance create a Teams- group for this study unit and invite the students to join.
Canvas is used for formal information, material sharing and storeing, returning assignments, etc.
If necessary, other means of communication will be agreed by the learning community commonly in the beginning of the study unit.
Changes to preliminary program are possible, but the students will be notified if neccessary.

Grading scale

H-5

Evaluation methods and criteria

In this study unit the assessing of the competences will be done by using the criteria set for requirement level II.

Evaluation criteria, satisfactory (1-2)

The student is able to
– use essential professional concepts when explaining various work practices and situations
– search for information in different sources
– report
– work under guidance using the skills and methods learned
– interact with customers and/or co-operation partners
– receive guidance
– work as a member of a team
– plan the progress of his/her work and use of time under guidance
– work safely and in accordance with the professional code of conduct
– follow the provided instructions and rules

Evaluation criteria, good (3-4)

The student is able to
– use professional concepts in a consistent manner when explaining various work practices and situations
– gather information and use his/her knowledge basis
–report in the agreed manner
– work using the skills and methods learned
– engage in professional interaction with customers and/or co-operation partners and identify their needs
– take part in guidance and utilise it
– engage in goal-oriented work in a team
– plan and manage the progress of his/her work and use of time
– detect safety-related risks
– justify this/her actions in accordance with the professional code of conduct

Evaluation criteria, excellent (5)

The student is able to
– use professional concepts extensively
– compare and choose relevant information
– report and communicate in a professional manner
– work independently, using the skills and methods learned
– take responsibility for interaction with customers and/or co-operation partners and for responding to their needs
– anticipate his/her need for guidance
– promote the team’s work and team spirit
– manage his/her time appropriately, completing the agreed tasks at the required quality level
– work responsibly, applying the skills and methods learned
– plan and evaluate their work, taking safety and/or ethical aspects into consideration

Further information

Before enrolling to this study unit, you should have adequate competence of safety, security and risk management, which you can acquire for example by completing study unit HT00BN79 Basics of Corporate Safety, Security and Risk Management (10 cr) or TO00BS57 Basic Theory of Corporate Safety, Security and Risk Management (5 cr) at Open University of Applied Sciences

Learning outcomes

The student is able to:
- define international preparedness and crisis management operators and their roles
- define fundamental international preparedness and crisis management compliance requirements and best practices
- define global threats and analyze their impact to society

Teaching methods

Virtual implementation with individual and team work. Before enrolling to this study unit, you should have adequate competence level of security management, which you can acquire for example by completing study unit: TO00BS57 Basic Theory of Corporate Safety, Security and Risk Management (MOOC).

The study unit starts and Canvas-workspace opens early May 2022. After approval it's the students responsibility to follow the study unit guidelines and finish all assignments. All assignments must be returned by the end of the study unit 31.8.2022. A more detailed implementation plan with learning events will be published also in Canvas-workspace.

Learning materials and recommended literature

All needed learning material is uploaded on Canvas workspace. You can familiarize yourself with the topics of study unit in Finnish Institute of International Affairs (Finnish Institute of International Affairs and publications).

Alternative completion methods of implementation

You may have acquired competence, for example through work experience, training organized in the workplace, organizational activities or hobbies. Familiarize yourself with the process in LINK
( https://laureauas.sharepoint.com/sites/studentEn_planningstudies/SitePages/Recognition.aspx )
To apply for the recognition of this study unit, complete the form for recognition of prior studies. Enclose with your application any documents you refer to. If required, also enclose a description of the content of the substitute studies. The partial recognition of studies must be agreed on with the teacher of this study unit latest week 19 (9.5.2022-->).

Important dates

Canvas workspace will open on 2nd of May 2022 and close on 31st of August 2022.

Students workload

This is study unit of 5 credits. One credit is 27 hours of work. So this means that you have be prepared to work
135 hours to complete.

Content and scheduling

Study unit consist of orientation and three modules as follows.
- Orientation (individual assignment) (Fail/pass)
- Essay ((individual assignment) (40%)
- Media follow-up (team assignment) (40%)
- On-line exam ((individual assignment) (20%)

Further information for students

Tutoring:
Tutoring is available on beforehand set days and upon request. Personal discussion times should be pre-agreed with teacher.
Communication:
Zoom or Teams- application will be used for tutoring and general information sharing. The lecturers will in advance create a Teams- group for this study unit and invite the students to join.
Canvas is used for formal information, material sharing and storing, returning assignments, etc.
If necessary, other means of communication will be agreed by the learning community commonly in the beginning of the study unit.
Changes to preliminary program are possible, but the students will be notified if necessarily.

Grading scale

H-5

Evaluation criteria, satisfactory (1-2)

The student is able to
– use essential professional concepts when explaining various work practices and situations
– search for information in different sources
– report
– work under guidance using the skills and methods learned
– interact with customers and/or co-operation partners
– receive guidance
– work as a member of a team
– plan the progress of his/her work and use of time under guidance
– work safely and in accordance with the professional code of conduct
– follow the provided instructions and rules

Evaluation criteria, good (3-4)

The student is able to
– use professional concepts in a consistent manner when explaining various work practices and situations
– gather information and use his/her knowledge basis
–report in the agreed manner
– work using the skills and methods learned
– engage in professional interaction with customers and/or co-operation partners and identify their needs
– take part in guidance and utilise it
– engage in goal-oriented work in a team
– plan and manage the progress of his/her work and use of time
– detect safety-related risks
– justify this/her actions in accordance with the professional code of conduct

Evaluation criteria, excellent (5)

The student is able to
– use professional concepts extensively
– compare and choose relevant information
– report and communicate in a professional manner
– work independently, using the skills and methods learned
– take responsibility for interaction with customers and/or co-operation partners and for responding to their needs
– anticipate his/her need for guidance
– promote the team’s work and team spirit
– manage his/her time appropriately, completing the agreed tasks at the required quality level
– work responsibly, applying the skills and methods learned
– plan and evaluate their work, taking safety and/or ethical aspects into consideration

Further information

Before enrolling to this study unit, you should have adequate competence of safety, security and risk management, which you can acquire for example by completing study unit HT00BN79 Basics of Corporate Safety, Security and Risk Management (10 cr) or TO00BS57 Basic Theory of Corporate Safety, Security and Risk Management (5 cr) at Open University of Applied Sciences

Learning outcomes

The student is able to:
- define international preparedness and crisis management operators and their roles
- define fundamental international preparedness and crisis management compliance requirements and best practices
- define global threats and analyze their impact to society

Teaching methods

Virtual implementation, individual and team work. Before enrolling to this study unit, you should have adequate competence level of security management, which you can acquire for example by completing study unit: A9484 Basics of Corporate Security and Risk Management 10 credits.

Location and time

This study unit is a virtual implementation. The study unit starts and Canvas-workspace opens late January. After approval it's the students responsibility to follow the study unit guidelines and finish all assignments. All assignments must be returned by the end of the study unit 31.5.2022. A more detailed implementation plan with learning events will be published also in Canvas-workspace.

Alternative completion methods of implementation

You may have acquired competence, for example through work experience, training organised in the workplace, organisational activities or hobbies. Familiarize yourself with the process in LINK
( https://laureauas.sharepoint.com/sites/linken/studypath/planningofstudies/recognitionofpriorlearning/Pages/default.aspx. )
To apply for the recognition of this study unit, complete the form for recognition of prior studies (in the menu on the right). Enclose with your application any documents you refer to. If required, also enclose a description of the content of the substitutive studies. The partial recognition of studies must be agreed on with the teacher of this study unit latest week 19.

Content and scheduling

After completing the course the student is able to:
- analyze the international security environment, the phenomenon, trends and forces affecting international business,
- understand the interdependence of Internal and External Security
- have an understanding of some the main actors in international security (task and roles)
- analyze international security through a current case

Further information for students

Tutoring:
Tutoring is available on beforehand set days and upon request. Personal discussion times should be pre-agreed with teacher.
Communication:
Zoom or Teams- application will be used for tutoring and general information sharing. The lecturers will in advance create a Teams- group for this study unit and invite the students to join.
Canvas is used for formal information, material sharing and storeing, returning assignments, etc.
If necessary, other means of communication will be agreed by the learning community commonly in the beginning of the study unit.
Changes to preliminary program are possible, but the students will be notified if neccessary.

Grading scale

H-5

Evaluation criteria, satisfactory (1-2)

The student is able to
– use essential professional concepts when explaining various work practices and situations
– search for information in different sources
– report
– work under guidance using the skills and methods learned
– interact with customers and/or co-operation partners
– receive guidance
– work as a member of a team
– plan the progress of his/her work and use of time under guidance
– work safely and in accordance with the professional code of conduct
– follow the provided instructions and rules

Evaluation criteria, good (3-4)

The student is able to
– use professional concepts in a consistent manner when explaining various work practices and situations
– gather information and use his/her knowledge basis
–report in the agreed manner
– work using the skills and methods learned
– engage in professional interaction with customers and/or co-operation partners and identify their needs
– take part in guidance and utilise it
– engage in goal-oriented work in a team
– plan and manage the progress of his/her work and use of time
– detect safety-related risks
– justify this/her actions in accordance with the professional code of conduct

Evaluation criteria, excellent (5)

The student is able to
– use professional concepts extensively
– compare and choose relevant information
– report and communicate in a professional manner
– work independently, using the skills and methods learned
– take responsibility for interaction with customers and/or co-operation partners and for responding to their needs
– anticipate his/her need for guidance
– promote the team’s work and team spirit
– manage his/her time appropriately, completing the agreed tasks at the required quality level
– work responsibly, applying the skills and methods learned
– plan and evaluate their work, taking safety and/or ethical aspects into consideration

Further information

Before enrolling to this study unit, you should have adequate competence of safety, security and risk management, which you can acquire for example by completing study unit HT00BN79 Basics of Corporate Safety, Security and Risk Management (10 cr) or TO00BS57 Basic Theory of Corporate Safety, Security and Risk Management (5 cr) at Open University of Applied Sciences