•   Exerting Influence in the Social Care Sector V1478-3006 01.08.2022-31.12.2022  5 credits  (SWF221SN) +-
    Learning outcomes of the course
    The student is able to
    - identify and apply various methods for promoting inclusion.
    - utilise various techniques for exerting influence in society.
    - act in cooperation with clients and other actors to develop inclusion

    Teacher in charge

    Paula Väliaho

    Mode of delivery

    60% Face-to-face, 40% Distance learning

    Learning materials and recommended literature

    [Enter here information on the books and articles to be used.Good practice is to add links to Laurea’s Finna. Contact your Laurea library well in advance to let the library know the study unit for which you need the books and the number of students in the study unit. The library can also help you find a suitable knowledge basis.]

    Teaching methods

    [Enter here the following key information on the study unit implementation: implementation method, learning environment and counselling and communication practices. Check the information above that campus has been chosen if there is even one meeting at the campus. If so, you should not mark full amount virtual points as this indicates that the implementation is fully online.]

    The study unit will take place in Lohja campus and online in the fall 2022. The study unit consists of teaching, guidance and working on your own. The time table is in Pakki/Tuudo.The main teaching language is English, though some of the assignments will be done in Finnish.

    Evaluation methods and criteria

    “The evaluation of competence is based on the descriptions of objectives in the curricula, and the level of competence is assessed according to the evaluation criteria listed in the implementation plan for the studies.” (Laurea degree regulations).

    [Enter here the items to be evaluated, emphases, evaluation methods, evaluators and evaluation date. Check the requirement level from the study unit information. You can remove criteria that are not suitable for this implementation but no other changes are not allowed.]

    In this study unit the assessing of the competences will be done by using the criteria set for requirement level I.

    PROFESSIONAL KNOWLEDGE BASIS, INFORMATION SEARCHING AND REPORTING


    To achieve grade 5 student must be able to
    - use professional concepts extensively
    - compare and choose
    - relevant information
    - report and communicate in a professional manner

    To achieve grade 3 student must be able to
    - use professional concepts in a consistent manner when explaining various work practices and situations
    - gather information and use his/her knowledge basis
    - report in the agreed manner

    To achieve grade 1 (or pass) student must be able to
    - use essential professional concepts when explaining various work practices and situations
    - search for information in different sources
    - report

    PROFESSIONAL PRACTICE AND WORKPLACE DEVELOPMENT

    To achieve grade 5 student must be able to
    - work independently, using the skills and methods learned
    - take responsibility for interaction with customers and/or co-operation partners and for responding to their needs
    - anticipate his/her need for guidance

    To achieve grade 3 student must be able to
    - work using the skills and methods learned
    - engage in professional interaction with customers and/or co-operation partners and identify their needs
    - take part in guidance and utilise it

    To achieve grade 1 (or pass) student must be able to
    - work under guidance using the skills and methods learned
    - interact with customers and/or co-operation partners
    - receive guidance

    TEAMWORK SKILLS, LEADERSHIP AND RESPONSIBILITY

    To achieve grade 5 student must be able to
    - promote the team’s work and team spirit
    - manage his/her time appropriately, completing the agreed tasks at the required quality level
    - work responsibly, applying the skills and methods learned
    - plan and evaluate their work, taking safety and/or ethical aspects into consideration

    To achieve grade 3 student must be able to
    - engage in goal-oriented work in a team
    - plan and manage the progress of his/her work and use of time
    - detect safety-related risks
    - justify this/her actions in accordance with the professional code of conduct

    To achieve grade 1 (or pass) student must be able to
    - work as a member of a team
    - plan the progress of his/her work and use of time under guidance
    - work safely and in accordance with the professional code of conduct
    - follow the provided instructions and rules

    [Leave the parts that apply] “Students who has failed to demonstrate their competence in accordance with the approved level must supplement or retake their study attainment in a manner and schedule defined by the teacher of the study unit. Laurea provides examination retake dates. Students must register for these examinations no later than 10 days before the retake date. A failed exam or other study attainment can be retaken twice. A failure to attend an actual examination is considered to be one completion attempt." (Laurea degree regulations.)

    All staff and students of Laurea are expected to adhere to good scientific practices, which includes appropriate referencing. Familiarise yourself with the practices and, if needed, ask for more information. All study assignments are to be done as individual work unless otherwise instructed. [If Urkund is used when assignments are checked, the lecturer will inform the students of this.]

    Language of instruction
    • English
    Timing

    01.08.2022 - 31.12.2022

    Enrollment period

    23.05.2022 - 29.05.2022

    Group(s)
    • SWF221SN
    Seats

    20 - 40

    Unit

    Laurea Lohja, sote

    Teacher(s)

    Paula Väliaho

    Further information for students

    The study unit corresponds to the requirements of Bachelor's level education.
    According to the degree regulations (section 18) "students must be present for the first contact teaching session, or they must notify the responsible teacher of their absence to confirm they intend to participate in studies, Alternatively, the teacher can specify a different manner for the student to confirm that they intend to participate in the studies. The completion of these measures can be required within a week of the studies having begun. The application of the aforementioned approach requires that the teacher notifies the students accepted to the study unit of the practice and that the practice is specifically mentioned in the study unit’s implementation plan.

    If the student has a justified reason for not attending the first contact teaching session or for not notifying the teacher of their intention to be involved in studies in the manner required by the teacher, the student must contact the responsible teacher to agree on participation in the studies. Their registration for the study unit will be rejected, of the student does not notify the teacher of being absent from the first contact teaching session or the reason for their absence cannot be considered justified, Another student who is in line for the study unit can be selected in their place."


    [If there are quata for certain type of students, open UAS, 3AMK etc please tell about the quata and the amount of study places reserved for those students in this field.
    If needed, you can also specify the target group the complementary competence study is primarily aimed at, if the target group is to be prioritised when students are accepted on the implementation.]

    The quality of the study unit implementation has been assessed and the self-evaluation report is available in [Canvas, Teams, or elsewhere; you can also add OneDrive link].

    Programme(s)

    Degree Programme in Social Services (SWF2), Laurea Lohja

    Campus

    Laurea Lohja

    RDI portion

    2 credits

    Virtual portion

    2 credits

    Alternative completion methods

    All students are entitled to demonstrate their competence. The recognition and accreditation of prior competence is initiated by the students themselves. The competence is recognised and accredited by the teacher responsible for the studies or another person designated to the position. The assessment is carried out according to the same assessment criteria and, as a rule, same grading scale as that adopted for the corresponding study unit or module. The student is entitled to apply for accreditation of prior competence regardless of where, how and when the competence has been acquired. The student may also seek accreditation of competence to be acquired on the job as part of their degree (work-based learning). ... The student is responsible for demonstrating and verifying their competence and for providing sufficient information.

    [Describe the opportunities for accreditation of prior learning or other alternative completion methods.]

    Co-operation with working life and/or RDI

    [Use this field to describe the project/venture cooperation and other cooperation carried out with workplaces.
    The contents of this data field are used to monitor the implementation methods and the realisation of the strategic objectives. Filling in this field does not substitute for the need for the PRM entry.]

    Important dates

    [According to the degree regulations (section 18 ) compulsory attendance in a study unit must be specified and justified in the study unit’s implementation plan. Indicate the dates of the submission of assignments, exams and opportunities to retake examinations in the implementation. The actual implementation schedule is directly visible to students in Pakki as implementation reservations, so this information does not need to be repeated in this field.]

    According to the degree regulations (section 18) “students must be present in the first contact session or notify their teacher in charge if they cannot attend. If they fail to notify the teacher of their absence in the first contact session, their enrollment will be rejected. Another student in the queue may be enrolled in the study unit in the place of the absent student.” (Laurea degree regulations) In the case of online studies the lecturer can also specify some other way than participation on an online meeting what is required from the student so that he/she verifies his/her attendance on the study unit (Decision by the vice president, education 7/2019).

    Internationality

    [Use this field to describe the possible realisation of internationality in the study unit (e.g. international partners).
    The contents of this data field are used to monitor the implementation methods and the realisation of the strategic objectives. Leave the text if it applies:] The study unit is suitable for exchange students.

    Students workload

    [One credit equals approximately 26.7 hours of work performed by the student. You can evaluate the student’s time management in different assignments. A tool for calculating the workload is available in the “Implementations” menu of the teacher’s desktop in Peppi.]

    Content and scheduling

    [Describe the content by using the vocabulary used in the world of work. Eg. if you are teaching the basics of programming, tell also which language you are teaching. From this field you should be able to find same words, which are being used in job postings. The field will be used in a service using AI to match studies, jobs and personal competences.]

    Location and time

    [This field is not used at Laurea.]